To Live by Necessity is to Know True Freedom free essay sample

She describes he natural beauty of Hollies Pond in depth, but also describes the noticeable traces of humanity: beer cans under the bushes; motorcycle tracks woven Into the ground; a highway that sits at one end of the pond. She seems to have observed that this remarkable piece of shallowness (Dullard 1) has over time, become tainted with the traces of humanity. She notices indications of worldly necessities, but chooses to do only that-?notice. She decides not to indulge her notices into becoming unessential distractions.Most of humanity goes against that grain and accepts distractions to fine them, afraid that without them, they may not have an identity. Dullard in fact uses her own power of choice to not let the traces of humanity keep her from seeing the true beauty of Hollies Pond. Dullard makes constant reference to the word wild. She begins her essay with the phrase, A weasel is wild (Dullard 1) and continues to describe the meaning of wild which eventually causes her to desire that characteristic. We will write a custom essay sample on To Live by Necessity is to Know True Freedom or any similar topic specifically for you Do Not WasteYour Time HIRE WRITER Only 13.90 / page But her definition of wild becomes more sophisticated as she further observes the weasel. Before the weasel encounter, Dullard seems to think that a wild weasel has no sense of direction and purpose In life. But when that long glance between the two takes place, she comes to realize that people are not as free as they appear to be. This is both an upsetting, yet Inspiring moment for Dullard. She Is upset that her perception of freedom, is not letting her live freely at all, but she is inspired to learn how to find and utilize her newly defined form of freedom. She changes her logic of wild and instead defines it as the dignity of living without bias or motive (Dullard 3). She ultimately concludes that a wild nature can in reality be a calm nature by, yielding, not fighting (Dullard 3). Dullard now uses the word wild In hopes that It will have a deeper connotation to Its meaning. She subtly emphasizes that one attribute of the word wild is drive-?the drive of instinct, which in turn, can also be defined as freedom. Dullard advises that to gain this true freedom, one must, stalk [their] calling O locate the most tender and live spot (Dullard 3). Humanity must have a desire to live by necessity, following instinct. For freedom is not attainable without a yearning. But it is a matter of the desire combined with choice that Influences the result of how one lives freely. Dullard defines what living by necessity really means. She Identifies that humanitys perception of necessity Is skewed, as hers was. Certain distractions in the world become natural to individuals, numbing them as to what real freedom feels like. Distractions have been accepted by humanity to define them.Humanity has taken these outside distractions, which are unimportant to survival, and has transitioned them to internal problems and worries. Society alone has allowed and accepted this transition, nothing else. Dullard explains not encourage the abandonment of reason for instinct. She simply implies that instinct is reason enough. She writes in her essay, l would like to learn, or remember, how to live (Dullard 2). This phrase denotes that she once, or humanity once knew how to live-?she Just needs to remember what living really indicates.Dullard acknowledges the fact that society once knew how to live as the weasel, acting on instinct and yielding every moment to the perfect freedom of single necessity (Dullard 3). Too many people mold, and form themselves to become what they think is right for society standards, when in reality, simple living in the natural state is the origin of true freedom. Living behind superficial walls is misguided happiness. True happiness comes when instinct takes control. Being raw individuals elevates humanity to real freedom.Dullard describes the weasel as being, obedient to instinct (Dullard 1), not distracted by its surroundings. The weasel may notice the surroundings, but he chooses to let them have no affect on his actions, Just like Dullard chose not to let the unnatural surroundings at Hollies Pond have an affect on her. Instinct is a form of lesson. Dullard makes reference to the weasels behavior stating that, instinct taught him (Dullard 1). This implies that instinct at one point, might have been unnatural, but can be learned if we are willing-?it is only a matter of choice.Some individuals think that life is dependent on the circumstances that make up society. But those peoples perceptions on life are skewed. It is those surroundings that are distractions to humanitys natural, simplistic life that many fail to live. Dullard says, l come to Hollies Pond not so much to learn how to live as, frankly, to forget about it (Dullard 2). Indeed, true living is achieved when outside disturbances are removed. Too live by necessity, is to know true freedom.

Free Essays on Obstacle

Obstacle Essay â€Å" You’re such a disappointment!† The horrible phrase one’s mother might reiterate to them over a hundred times after seeing your report card. That guilty feeling in your gut, where your stomach feels achy and you just want to lock yourself in the bathroom to get away from taking responsibility for your own actions. The hate that grows from within for all those times you received phone calls and had â€Å"better things to do,† than doing your homework. I understand, I felt these feelings of the mind shutting off. I’ve felt the embarrassment of being singled out by a teacher in class, and having that warm sensation overcome your face, where your cheeks turn rosy and the brow upon your head consumes with perspiration and drips like a leaky faucet. All because you didn’t do your homework. I must admit, the first two years of high school were hell for me. They were two of the most difficult years I have gone through in my sixteen years of existence. Laziness and slacking off consumed my mind and body. I was the queen of procrastination, but with help and guidance from a great support team I seem to be overcoming my horrible habits, if that’s what you want to call them. I guess I could complain and blame it on the ADD that I was diagnosed with, but that would be way too easy for me to do. I know my ADD has had many influences on the decisions I have made and the way I go about many things, but laziness and slacking off were my doings. I let myself succumb to these nightmares of every student-teacher relationship. When offered extra help while I was struggling in school I was too bold and pig-headed to accept the help that I needed. Instead of asking questions to further my knowledge of class discussion topics, I could be seen in the back of class dozing off, or trying to indulge in a juicy conversation with my neighbor. When exam time in tenth grade came around, I finally had to get my act together. I was... Free Essays on Obstacle Free Essays on Obstacle Obstacle Essay â€Å" You’re such a disappointment!† The horrible phrase one’s mother might reiterate to them over a hundred times after seeing your report card. That guilty feeling in your gut, where your stomach feels achy and you just want to lock yourself in the bathroom to get away from taking responsibility for your own actions. The hate that grows from within for all those times you received phone calls and had â€Å"better things to do,† than doing your homework. I understand, I felt these feelings of the mind shutting off. I’ve felt the embarrassment of being singled out by a teacher in class, and having that warm sensation overcome your face, where your cheeks turn rosy and the brow upon your head consumes with perspiration and drips like a leaky faucet. All because you didn’t do your homework. I must admit, the first two years of high school were hell for me. They were two of the most difficult years I have gone through in my sixteen years of existence. Laziness and slacking off consumed my mind and body. I was the queen of procrastination, but with help and guidance from a great support team I seem to be overcoming my horrible habits, if that’s what you want to call them. I guess I could complain and blame it on the ADD that I was diagnosed with, but that would be way too easy for me to do. I know my ADD has had many influences on the decisions I have made and the way I go about many things, but laziness and slacking off were my doings. I let myself succumb to these nightmares of every student-teacher relationship. When offered extra help while I was struggling in school I was too bold and pig-headed to accept the help that I needed. Instead of asking questions to further my knowledge of class discussion topics, I could be seen in the back of class dozing off, or trying to indulge in a juicy conversation with my neighbor. When exam time in tenth grade came around, I finally had to get my act together. I was...

Oil and gas Essay Example | Topics and Well Written Essays - 500 words

Oil and gas - Essay Example Hence, equip with adequate expertise meant for managing and being a leaders in this globe’s dynamic as well as fastest growing sector.  I also have some knowledge on first aid. At the oil fields, with ease and heightened precision I can assist in handling minor casualties that entail immediate intervention before taken to specialized treatments. Generally, I can assist the medics in maintaining and checking stocks of emergency supplies, inspecting both cooked and raw foods, and testing the supplies of drinking water to determine whether they are clean. Enrolling in the Oil and Gas program will help equip me with the skills needed to support various professional or management careers in the worldwide petroleum industry. The program offers comprehensive as well as advanced information regarding both upstream and downstream operation of a petroleum firm. The program also stresses on the need of me focusing on exploring the emerging technologies and major challenges, which affect the future, exploration, and production of oil and gas. Additionally, the program focuses on pivotal issues for Petroleum industry professionals/managers such as health and safety management, petroleum economics and contracts, and project and quality management. Certainly, the program is ideal for me since I have interest in careers that deal with energy and hydrocarbon; more specifically oil production, processing, and transactions. The program, therefore, is likely to enhance my commercial, non-technical and technical skills. The program will help prepare me for the challenges in worldwide employment market as well as develop or strengthen my broader professional and personal skills that I will acquire as I advance in this field. Furthermore, the program offers practical career workshops and to its participants a prospect to experience various

PUBLIC MANAGEMENT Essay Example | Topics and Well Written Essays - 2500 words

PUBLIC MANAGEMENT - Essay Example This was seen to have fewer negative effects on other objectives and considerations that governments may have in considering projects and offering of services to citizens in a country. Studies reveal that the new public management philosophy is more outcome and efficiency oriented as it employs better management techniques for public budgets and other key objectives with public interest. The techniques applied may include: the application of competition such is evidenced in the private sector, public organizations through the emphasis on leadership and economic principles, and a range of other approaches. Secondly, such an approach encourages new developments via the process of splitting large bureaucracies into smaller and more fragmented ones. This can be done through the introduction of competition between different public agencies, and between public agencies against private firms. Or, it can be achieved through incentivization while basing the change purely on more economic line s. This will allow the alignment of events towards the natural capitalistic systems that already exist within the markets. Furthermore, this is one of the easiest ways to impose values and techniques on the private sector management into the public sector organization and improve service and product delivery at the very same time. Incentivization theme On the other hand, it is important to look at one of the themes applied in public reform in forming the basis of furthering the paper discussion. Incentivization is a process that facilitates the shifting away from the involvement of managers and staffs rewarding performance in terms of a diffusing public or professional ethos and instead shifting towards a greater emphasis on financial-based and specific performance incentives (Lane 2000, p.54). This, in terms of the public sector, implied that there is a movement involving a down group and at the same time a down grid with relation to the existing cultural theories. It is said that the impact of this particular involvement has been marked by many professional groups that then chose to focus upon this as a means of encouraging an improved level of performance. Studies show that ‘incentivization’ mechanisms show the highest percentage of emerging the ‘new public management’ developments. This is evident because of an increased diversity involving public agencies in several countries to include: the United Kingdom, Australia, and the United States. However, the expectations that performance related pay will improve performance of agency staffs has oftentimes been viewed as impossible by many scholars/researchers. Recent reforms in the United States Suggestions from an array of studies show that, the United States has engaged in various reforms within the past several decades; from healthcare to taxes and other sectors of the economy and society. Regarding the incentivization theme, it has been found that the current United States corpora te tax codes have had a large impact of incentivizing companies to relocate their business operations to other countries; thereby making these companies more multinational. This has been viewed as a technique of providing employment that will

Latin American Civilization Essay Example | Topics and Well Written Essays - 750 words

Latin American Civilization - Essay Example Indeed, the female workers were never allowed to get established. Since Peron was elected in a constitution manner, he wanted to make himself popular by giving some rights to the workers and other social groups in the country.1 During Peron’s presidency, he wanted to deal with the issue of giving hope to the lower class people by giving them a better understanding and pacifying them by offering them some rights that could calm their demand. Therefore, this was in line in making sure that there were no controversies between his government and the workers. Analysts argue that the authoritarian was the best action that the president could have taken as a means of taking care of the needs of the lower class, but the president had some better ideas than that.2 Before his election to the presidency, the laws and democratic rights that were well outlined in the constitution were not practiced in the ground. When he took the presidency, he ensured that he improved the peoples’ standards of living by ignoring the constitution and offering the workers some better schemes that benefited them. He is said to use coercion and repression to achieve his goals. It was affected in such a way that every social service that was given to the society by the government to the people had a string attached to it. Therefore, every service that was given to the society could give back some benefit to the government. For example, the Peron’s foundation FEP that the government established was purposely aimed at abolishing the social charities that had been established by individuals. In their place, social aid was given to the society through the FEP. The major purpose was to create a wider social base that could come to the support of the presiden t.3 Peron also wanted to support from both genders in the population. Before his release and election to the presidency, women were never allowed to participate in the

Four Phases of the Business Cycle

Four Phases of the Business Cycle ECONOMICS Q 1 Define the term Business Cycle and also explain the phases of business or trade cycle in brief? Ans: The business cycle is the periodic but irregular up-and-down movements in economic activity, measured by fluctuations in real GDP and other macroeconomic variables.Diagram of Business Cycle (or Trade Cycle) :- The business cycle starts from a trough (lower point) and passes through a recovery phase followed by a period of expansion (upper turning point) and prosperity. After the peak point is reached there is a declining phase of recession followed by a depression. Again the business cycle continues similarly with ups and downs. Explanation of Four Phases of Business Cycle 1. Prosperity Phase : Expansion or Boom or Upswing of economy.When there is an expansion of output, income, employment, prices and profits, there is also a rise in the standard of living. This period is termed as Prosperity phase.The features of prosperity are :- High level of output and trade, High level of effective demand, High level of income and employment, Rising interest rates, Inflation, Large expansion of bank credit, Overall business optimism. 2. Recession Phase: from prosperity to recession (upper turning point). The turning point from prosperity to depression is termed as Recession Phase. During a recession period, the economic activities slow down. When demand starts falling, the overproduction and future investment plans are also given up. There is a steady decline in the output, income, employment, prices and profits. The businessmen lose confidence and become pessimistic (Negative). It reduces investment. The banks and the people try to get greater liquidity, so credit also contracts. Expansion of business stops, stock market falls. Orders are cancelled and people start losing their jobs. The increase in unemployment causes a sharp decline in income and aggregate demand. Generally, recession lasts for a short period. 3. Depression Phase : Contraction or Downswing of economy.When there is a continuous decrease of output, income, employment, prices and profits, there is a fall in the standard of living and depression sets in. The features of depression are :- Fall in volume of output and trade, Fall in income and rise in unemployment,Decline in consumption and demand, Fall in interest rate, Deflation, Contraction of bank credit, Overall business pessimism.In depression, there is under-utilization of resources and fall in GNP (Gross National Product). The aggregate economic activity is at the lowest, causing a decline in prices and profits until the economy reaches its Trough (low point). 4. Recovery Phase : from depression to prosperity (lower turning Point). The turning point from depression to expansion is termed as Recovery or Revival Phase.During the period of revival or recovery, there are expansions and rise in economic activities. When demand starts rising, production increases and this causes an increase in investment. There is a steady rise in output, income, employment, prices and profits. The businessmen gain confidence and become optimistic (Positive). This increases investments. The stimulation of investment brings about the revival or recovery of the economy.Thus we see that, during the expansionary or prosperity phase, there is inflation and during the contraction or depression phase, there is a deflation. Q2. Monopoly is the situation there exists a single control over the market producing a commodity having no substitutes with no possibilities for anyone to enter the industry to compete. In that situation, they will not charge a uniform price for all the customers in the market and also the pricing policy followed in that situation? Ans: A market structure characterized by a single seller, selling a unique product in the market. In a monopoly market, the seller faces no competition, as he is the sole seller of goods with no close substitute.In a monopoly market, factors like government license, ownership of resources, copyright and patent and high starting cost make an entity a single seller of goods. All these factors restrict the entry of other sellers in the market. Monopolies also possess some information that is not known to other sellers. Characteristics of monopoly: Only one single seller in the market, There is no competition, There are many buyers in the market, The firm enjoys abnormal profits, The seller controls the prices in that particular product or service and is the price maker, Consumers don’t have perfect information, There are barriers to entry. These barriers many be natural or artificial, The product does not have close substitutes. Advantages of monopoly Monopoly avoids duplication and hence wastage of resources. Due to the fact that monopolies make lot of profits, it can be used for research and development and to maintain their status as a monopoly. Monopolies may use price discrimination which benefits the economically weaker sections of the society. Monopolies can afford to invest in latest technology and machinery in order to be efficient and to avoid competition. Disadvantages of monopoly Poor level of service, No consumer sovereignty, Consumers may be charged high prices for low quality of goods and services, Lack of competition may lead to low quality and out dated goods and services. Price Discrimination : It is the ability to charge different prices to different individual. Need for price discrimination: increase output and profit. Buying pattern of individuals will be different. Increase the economic welfare. Eg: Air tickets, movie tickets , discount coupons etc. multiple types of price discrimination: First-degree price discrimination is an attempt by the seller to leave the price unannounced in advance and charge each customer the highest price they would be willing to pay for the purchase. A business may benefit by offering different prices to those who purchase in larger volumes because either they can increase their profit with the increased volume sales or their costs per unit decrease when items are purchased in volume. Businesses can create alternative pricing methods that distinguish high-volume buyers from low-volume buyers. This is second-degree price discrimination. Third-degree price discrimination is differential pricing to different groups of customers. One justification for this practice is that producing goods and services for sale to one identifiable group of customers is less than the cost of sales to another group of customers. For example, a publisher of music or books may be able to sell a music album or a book in electronic form for less cost than a physical form like a compact disc or printed text. Q3 Fiscal policy is a package of economic measures of the government regarding public expenditure, public revenue, public debt or borrowings. It is very important since it refers to the budgetary policy of the government. Explain the fiscal policy and its instruments in detail? Ans: Fiscal policy is the means by which a government adjusts its spending levels and tax rates to monitor and influence a nations economy. It is the sister strategy to monetary policy through which a central bank influences a nations money supply. instruments of Fiscal Policy are Automatic Stabilizer and Discretionary Fiscal Policy: Automatic Stabilizer: The tax structure and expenditure are programmed in such a way that there is increase in expenditure and decrease in tax in recession and decrease in expenditure and increase in tax revenue in the period of inflation. It refers to built-in response to the economic condition without any deliberate action on the part of government. It is called built- in- stabilizer to correct and thus restore economic stability. It works in the following manner, Tax revenue: Tax revenue increases when the income increases; as those who were not paying tax go into the higher income tax bracket. When there is depression, the income decreases and many people fall in the no-income-tax bracket and the tax revenue decreases. ii) Discretionary Fiscal Policy: Under this, to stabilize the economy, deliberate attempts are made by the government in taxation and expenditure. It entails definite and conscious actions. Instruments of Fiscal Policy: Some important instruments of fiscal policy are: 1.TAXATION: Taxation is always a very important source of revenue for both developed and developing countries. Tax comes under two headingu2013Tax on individual(direct tax) and tax on commodity (indirect tax or commodity tax). a) Direct tax includes income tax, corporate tax, taxes on property and wealth. Indirect tax is tax on the consumptions. It includes sales tax, excise duty and custom duties. Direct tax structure can be divided into three bases- Progressive tax: Progressive tax says that higher the level of income, greater the volume of tax burden you have to bear. This means as income increases, the tax contribution should also increase. Low income group people pay low tax, whereas the high income group people pay higher tax. 2 Regressive tax: It is theoretically possible, though no government implements such tax structure, because that leads to unequal distribution of income. As your income increases the contribution through tax decreases. Low income people will pay more and high income people will pay less. Proportional tax: When the tax imposed is irrespective of the income you earn, every income group, high or low pay the same amount of tax. b) Indirect Tax Or consumpyion tax: tax which is iimposed on every unit of product . Q4 Explain the various methods of forecasting demand? Ans : Economic forecasting is the process of making predictions about the economy. Forecasts can be carried out at a high level of aggregation—for example for GDP, inflation, unemployment or the fiscal deficit—or at a more disaggregated level, for specific sectors of the economy or even specific firms. Methods of forecasting demand: Assumptions For many goods, the length of the product cycle is shrinking. Not only does this make it more difficult to build a historical database, it accentuates the need to forecast correctly. Computer technology makes it possible to adjust pricing instantly and to modify sales promotions on the run. Without accurate historical information to measure the impact of price changes, the business owner may be forced to experiment. Sales performance of other goods with similar product attributes may serve as proxies for a current product with no track record. Trend Analysis If you have historical data or if you can create it from related products trend analysis is the first step in demand forecasting. Plotting sales over time will reveal the presence of a sales trend if one exists. If there are aberrations â€Å"hiccups† in the trend you can look for explanations, which could include price, weather or demographic changes. If you are proficient with spreadsheet programs, you can chart data points and insert a trend line over the data. A more sophisticated approach is using least squares regression analysis which can also be done with standard spreadsheet software. Qualitative Forecasting A more subjective approach uses expert opinions to predict demand. Especially useful when there is a lack of historical data, relying on the collective opinion of experts makes sense. Begin with an analysis of the marketplace, reviewing the economic conditions. Obtain as much information about competitors’ performance as you can. Then gather opinions from a variety of sources within your business. Include the owner, sales manager, accountant, attorney and any others whose opinion you value. If you wish, you can get outside opinions as well. Qualitative forecasting is based on the consensus view of your panel as you digest and aggregate their opinions. Forecasting with Economic Indicators Depending on the products you sell and the customers who buy them, basing your demand forecast on one or more economic indicators may be an effective method. This style of demand forecasting works better with industrial buyers rather than retail. First, find the indicators that relate to your business. For example, small businesses in construction-related work can look to housing starts, building permits, loan applications and interest rates for solid indicators of the future. Businesses in agriculture can find clues to the future from farm income, interest rates and weather forecasts. The Departments of Commerce and Agriculture release statistics on an ongoing basis. Agricultural Extension Services and other state agencies provide complementary data Q5 Define monopolistic competition and explain its characteristics? Ans: Monopolistic Competition: A market structure in which several or many sellers each produce similar, but slightly differentiated products. Each producer can set its price and quantity without affecting the market place as a whole. Monopolistically competitive markets exhibit the following characteristics: Each firm makes independent decisions about price and output, based on its product, its market, and its costs of production. Knowledge is widely spread between participants, but it is unlikely to be perfect. For example, diners can review all the menus available from restaurants in a town, before they make their choice. Once inside the restaurant, they can view the menu again, before ordering. However, they cannot fully appreciate the restaurant or the meal until after they have dined. The entrepreneur has a more significant role than in firms that are perfectly competitive because of the increased risks associated with decision making. There is freedom to enter or leave the market, as there are no major barriers to entry or exit. A central feature of monopolistic competition is that products are differentiated. There are four main types of differentiation: Physical product differentiation, where firms use size, design, colour, shape, performance, and features to make their products different. For example, consumer electronics can easily be physically differentiated. Marketing differentiation, where firms try to differentiate their product by distinctive packaging and other promotional techniques. For example, breakfast cereals can easily be differentiated through packaging. Human capital differentiation, where the firm creates differences through the skill of its employees, the level of training received, distinctive uniforms, and so on. Differentiation through distribution, including distribution via mail order or through internet shopping, such as Amazon.com, which differentiates itself from traditional bookstores by selling online. Firms are price makers and are faced with a downward sloping demand curve. Because each firm makes a unique product, it can charge a higher or lower price than its rivals. The firm can set its own price and does not have to ‘take it from the industry as a whole, though the industry price may be a guideline, or becomes a constraint. This also means that the demand curve will slope downwards. Firms operating under monopolistic competition usually have to engage in advertising. Firms are often in fierce competition with other (local) firms offering a similar product or service, and may need to advertise on a local basis, to let customers know their differences. Common methods of advertising for these firms are through local press and radio, local cinema, posters, leaflets and special promotions. Monopolistically competitive firms are assumed to beprofit maximisers because firms tend to be small with entrepreneurs actively involved in managing the business. There are usually a large numbers of independent firms competing in the market. Q6 When should a firm in perfectly competitive market shut down its operation? Ans Definition of Perfect Competition A market structure in which the following five criteria are met: 1) All firms sell an identical product; 2) All firms are price takers they cannot control the market price of their product; 3) All firms have a relatively small market share; 4) Buyers have complete information about the product being sold and the prices charged by each firm; and 5) The industry is characterized by freedom of entry and exit. Perfect competition is sometimes referred to as pure competition. The reason for firm shut down in perfect competition A perfectly competitive firm is presumed to shutdown production and produce no output in the short run, if price is less than average variable cost. This is one of three short-run production alternatives facing a firm. The other two are profit maximization (if price exceeds average total cost) and loss minimization (if price is greater than average variable cost but less than average total cost). A perfectly competitive firm guided by the pursuit of profit is inclined to produce no output if the quantity that equates marginal revenue and marginal cost in the short run incurs an economic loss greater than total fixed cost. The key to this loss minimization production decision is a comparison of the loss incurred from producing with the loss incurred from not producing. If price is less than average variable cost, then the firm incurs a smaller loss by not producing that by producing. One of Three Alternatives: Shutting down is one of three short-run production alternatives facing a perfectly competitive firm. All three are displayed in the table to the right. The other two are profit maximization and loss minimization. With profit maximization, price exceeds average total cost at the quantity that equates marginal revenue and marginal cost. In this case, the firm generates an economic profit. With loss minimization, price is greater than average variable cost but is less than average total cost at the quantity that equates marginal revenue and marginal cost. In this case, the firm incurs a smaller loss by producing some output than by not producing any output.

Formal lab gravitaional acceleration :: essays research papers

Lab #5: Gravitational Acceleration Preparation: In preparation for the first part of this lab involving the Atwood's machine our team started by discussing the effects of the masses on the results of the machine as requested in question 1 of the lab manual. We believe that if the two masses were equal there would be no motion of either of them when released. However we believed that if the two masses were not equal, the heavier mass would fall downward pulling the lighter mass upwards. Below as requested by question 2 is a free body diagram of both situations Masses Equal Masses Unequal The tension on mass 1 is equal to the tension in mass 2 due to the same string attaching both masses and is shown mathematically above in the section where the masses are equal. In the second part gravity is solved for. We also believe that the difference between the two masses will affect the acceleration in a linear matter as requested in question 3. In preparation for part 2 we started by answering question 4 on which graph best describes freefall based for distance vs. time. We believed graph (b) showed this and is shown below. Our rational for this was that the object in free fall is undergoing a constant acceleration meaning its velocity will increase with time. This is shown on graph (b) by the increasing slope with time, and is the only graph to have its slope increase with time. Graph (a) has constant slope and graph (c) has its slope decrease with time. For question 5 which asked for the best velocity vs. time graph we believed that graph (a) is the best graph. Our rational for this was that because the object is under constant acceleration the velocity will increase at a constant rate. Graph (a) shows this while graph (b) shows constant velocity and graph (c) shows decreasing velocity. For question 6 which asked for the best acceleration vs. time graph we believed that graph (b) shows this the best. Our rational for this was that the object is under constant acceleration. Only graph (b) shows a constant acceleration. Graph (a) shows decreasing acceleration while graph (c) shows increasing acceleration. Procedure: Our procedure for part 1 is the following: First we measured the masses of both sides of the Atwood's machine and record these values. Next we held the smaller mass on the ground and measured the distance from the ground to the bottom of the larger mass, calling this value "s".

Alum Synthesis

Alum Synthesis: The Chemical Process of Recycling Aluminum Introduction By recycling aluminum cans, the costs and energy savings are dramatically more resourceful and efficient than producing aluminum from what it is naturally found in, bauxite ore. The process of recycling aluminum to produce potassium aluminum sulfate, a common alum, will be done through a serious of chemical reactions. Through this reaction, percent yield will be determined. Materials and Methods The mass of a 250 mL beaker is measured, and . 9 to 1. 2 grams of aluminum can pieces are added to the beaker. The mass of the beaker and aluminum pieces is recorded.These two masses are then used to determine the initial mass of aluminum being reacted in this experiment. 50 mL of 1. 4 M KOH is then added to the beaker and placed upon a hot plate under a fume hood to fumigate any escaping gases during the reaction, which should take no longer than 30 minutes. The heat from the hot plate speeds the reaction, and the reacti on mixture must be kept no lower than 25 mL by adding distilled water. An aspirator is assembled by using a suction flask, clamp, ring stand, rubber tubing, funnel, and filter paper to filter the reaction mixture once the first reaction is complete. Feature Article –  Free-Radical BrominationThe filter paper is then wetted, the vacuum source is turned on, and the mixture is poured through the filter, using 5 mL of distilled water to rinse the beaker. The filter will catch all the dark filtrate from the aluminum can pieces, and the suction flask will contain a clear (transparent) solution. The solution is then transferred to a clean 250 mL beaker, and the suction flask is rinsed with 10 mL distilled water to insure all the remaining solution is transferred to the clean beaker. The beaker is placed in an ice bath to cool the solution, filling the beaker three fourths full with ice and cold water. 0 mL of 6. 0 M sulfuric acid is measured and slowly added to the mixture, using a stirring rod to mix. Heat the mixture on a hot plate if any solids begin to develop in the mixture. Using a 1 L plastic beaker, prepare another ice bath and place the beaker containing the reaction mixture in the ice bath. Once in the ice bath, the alum crystals forming in the mixture will begin to precipitate. To help the process of crystal formation, use the stir rod to scrape the sides of the beaker and form an alum seed crystal. Reassemble a clean vacuum filter, and filter the crystals onto the filter paper.Get as much of the precipitated crystals out of the beaker and then rinse the beaker twice with 10 mL of 50% ethanol solution to transfer all the crystals to the beaker. Once the alum crystals have dried, measure the mass of a clean 250 mL beaker and then measure the mass of the beaker containing the alum crystals. Results and Discussion The first reaction to begin the alum synthesis process is when aluminum and potassium hydroxide are combined and water and heat are added during the reaction. The result is an ion called â€Å"aluminate† with an excess of hydrogen gas.This type of reaction is a redox (reduction-oxidation) reaction, where the aluminum metal is oxidized to aluminum with an oxidation number of +3 an d the hydrogen in potassium hydroxide or in water is reduced from an oxidation number of +1 to zero in hydrogen gas. The balanced chemical equation for this reaction is: 2Als+ 2KOHaq+ 6H2Oliq>2KAlOH4aq+ 3 H2g During this reaction, the colorless mixture potassium hydroxide and aluminum pieces turned a dark, ashy gray as heat was applied and the aluminum can pieces dissolved. The heat sped the reaction, and within thirty minutes all the aluminum pieces were dissolved, leaving behind aluminate.In the second reaction, the filtered aluminate solution is mixed with sulfuric acid once the solution has cooled. After stirring for several minutes, crystals began to form. The crystalizing liquid started thickening and appeared to be white. The product of this reaction is aluminum hydroxide, potassium sulfate, and water. The fully balanced chemical equation is: 2 KAl(OH)4(aq) + H2SO4(aq) >2Al(OH)3(s) + 2 H2O(liq) + K2SO4(aq) This equation represents a metathesis (precipitation) reaction where a ll the elements and groups recombine and a precipitate, aluminum hydroxide, is formed.As more sulfuric was added, the precipitate began to dissolve, thus causing the third reaction. The solution contains aluminum, potassium, and sulfate ions now. The balanced chemical equation is: 2 Al(OH)3(s) + 3 H2SO4(aq) >Al2(SO4)3(aq) + 6 H2O(liq) This type of reaction is a metathesis (acid-base) reaction where, once again, the elements and groups recombine themselves. The product of this reaction is aluminum sulfate and water. The solution continued to cool and crystals began to form. The last reaction resulted in a hydrated potassium aluminum sulfate, and crystals of this compound formed slowly. Seed crystals† developed and more alum deposited causing the crystals to expand. The balanced chemical reaction is: Al2(SO4)3(aq) + K2SO4(aq) + 24 H2O(liq) >2 KAl(SO4)2†¢12 H2O(s) This would be considered a combination reaction because the three reactants combined to form one product, hydrat ed potassium aluminum sulfate. The overall balanced chemical reaction for this experiment is: 2Al(s)+2KOHaq+4H2SO4(aq)+22H2O(liq) >2 KAl(SO4)2†¢12H2O(s) + 3 H2(g) At the start of the experiment, 1. 01 grams of aluminum can pieces were used. After forgoing several reactions, 4. 19 grams of alum were recovered.Theoretically, 17. 76 grams of alum should have been recovered. This gives a percent yield of 24. 0%. Human error was definitely the main factor as to why the percent yield is not anywhere close to 100%. My lab partner and I did have a misunderstanding with one of the steps in the instructions; instead of placing the beaker in an ice bath during reaction three, we thought the directions said to put ice directly into the reaction mixture. This may have caused some error in the cooling process of the mixture, and may have not enabled all the crystals to form properly.We may have also not waited long enough for all the crystals to form. Also, some of the crystals may have gott en lost while being transferred from the beaker, to the aspirator, and then to another beaker to be measured. These factors are reasonable as to why the actual yield of alum that resulted in the experiment were not accurate with the theoretical yield of alum. Conclusion Through a series of reactions, it is understood that aluminum can be chemically reacted to result in the synthesis of alum. The success of the experiment proves the reasoning of the process of recycling aluminum.

Is MDMA (ecstasy) a safe drug to take Essay Example

Is MDMA (ecstasy) a safe drug to take Essay Example Is MDMA (ecstasy) a safe drug to take Essay Is MDMA (ecstasy) a safe drug to take Essay 1 Is MDMA ( rapture ) a safe drug to take? Discuss in relation to findings from recent research. MDMA or Ecstasy ( besides known by a figure of different names, such as vitamin E, x, and eckies ) is a psychedelic drug, a drug which primary alters perceptual experience, knowledge or temper ( Abraham, Aldridge A ; Gogia, 1996 ) . It is said to advance feelings of love, friendly relationship and euphory. ( Drugs and Crime Prevention Committee, 2003 ) . Some users claim that the drug helps them to swear others and to understand themselves better ( Greer, G. A ; Tolbert, 1986 ) . It normally comes in the signifier of a pill which is ingested. However, unwanted effects of MDMA can include fainting, sickness and emesis, a rushing bosom, teeth grinding, and katzenjammer effects which can last for a figure of yearss such as fatigue, and depression. To explicate these conflicting positions of how the dyspepsia of Ecstasy can impact the human encephalon, experiments on animate beings have been performed. Green et Al ( 2003 ) argue that MDMA decreases encephalon degrees of 5-hydroxytryptamine in animate beings, and amendss the subdivisions through which serotonin-producing nerve cells reach out and link to other cells. The function 5-hydroxytryptamine is known to set temper, emotion, slumber and appetency. Therefore 5-hydroxytryptamine is a cardinal mechanism in the control of legion behavioral and physiological maps. Decreased serotoninergic neurotransmission has been implied to play a cardinal function in the cause of depression. The concentration of synaptic 5-hydroxytryptamine is controlled straight by its re-uptake into the pre-synaptic terminus and, therefore, drugs barricading 5-hydroxytryptamine conveyance have been successfully used for the intervention of depression. Therefore, the euphory effects of Ecstasy can be assum ed to alleviate systems of unhappiness and anxiousness – nevertheless, the overall effects of taking the drug have negative effects for the serotoninergic system. Therefore, Ecstasy can non be classified as a safe drug to take in the chase of alleviating depressive symptoms. However, these consequences have been occurred through experiments on animate beings. It is hence hard to reassign these effects in the animate being encephalon to deduce that alterations in the human encephalons will be the same. To battle these disagreements McCann et Al ( 1994 ) have investigated the long term harm that taking Ecstasy can hold on the human encephalon. Using a radioactive chemical that binds to serotonin receptors, the research workers have shown from antielectron emanation imaging encephalon scans that Ecstasy users have fewer receptors for the neurotransmitter. They conclude that ‘MDMA is toxic to encephalon 5-hydroxytryptamine neurons.’ However, this is non the lone effect of devouring the drug. Research workers have found that MDMA has affects on the cognitive procedures – such as thought and memory. Surveies have confirmed that MDMA users suffer poorer memory and impaired idea procedures, compared with people who have nt tried the drug ( Morgan, 2000 ) . It has besides been found to interfere with procedures such as sleep rhythms ( Allen et al, 1993 ) . However, the job with imputing these effects to ecstasy is that people who take MDMA, it can non be ruled out that these people often stay up wholly dark dancing and may besides take other drugs. To look into the stray effects of rapture, Ricaurte et Al ( 2002 ) , gave squirrel monkeys and baboons doses of the drug that they claimed were similar to those taken by some clubbers in a individual dark. This dosage administrated to the animate beings was found to wholly destruct nerve cells that produce the neurotransmitter Dopastat, and led to a status similar t o Parkinson s disease. Furthermore, 2 out of the 10 animate beings died. Ricaurte et Al ( 2002 ) conclude that A immature person who sustains hurt to these dopamine cells and depletes their modesty may be at greater hazard of paralysis agitans. It is widely-accepted from literature reappraisals that encephalon Dopastat declines with age ; hence, taking the drug Ecstasy AIDSs to rush up the aging procedure and susceptibleness for developing diseases such a Parkinson’s. However, how relevant is this scientific grounds to users of the drug itself? Whiteaker ( 2004 ) conducted qualitative research in the signifier of questionnaires to detect how users and non-users perceived the safeness of the drug. It was found that the two groups had different constructs in respects to the possible dangers of Ecstasy. Nearly half of the drug users questioned describing that they felt the drug was reasonably safe to utilize. The non-user felt it was reasonably insecure ( and mostly set this down to the deficiency of information they felt they had about the drug ) . In mention to the side-effects of taking ecstasy, the bulk of users ( 64.6 % ) reported ‘coming down’ and 29.2 % reported doing bad determinations as the effects of taking the drug.While one tierce of drug users reported side effects, and 43.8 % of users reported bad yearss, these responses are ill-defined as to exactly what injuries are being experienced by users. Less than a 6th of the resp ondents in Whiteaker ( 2004 ) research reported no injuries, nevertheless, it is non clear how many times these people used the drug, as six of them reported that they did non utilize any more. Consequently they may hold experienced no injury as a effect of merely seeking Ecstasy the one time, hence, these consequences are non really representative, and it is inaccurate to generalize findings from these responses. Different responses were made for the reactions of users and non-users in response to the possibility of if they find themselves or a friend in problem. Drug users were reported to follow schemes such as imbibing H2O. This may be explained by their greater instruction sing the dangers of desiccation. However, it needs to be noted that this can besides be a unsafe method of covering with the state of affairs, for illustration, in the instance of Anna Wood, have really died from inordinate hydration ( Sabin, 2002 ) . Therefore, to measure whether MDMA ( Ecstasy ) is a safe drug to take, is a complex inquiry and needs mention to non merely the scientific grounds, but the societal deductions of drug usage. The relevancy of scientific research about the harmful effects of the drug bears small connexion to the grounds why people choose or do non take to experiment with the drug. Highlighted in Whiteaker ( 2004 ) research is that instruction is a valuable thing – non needfully to warn people off from the drug, but to educate them on how they can react in a troubled state of affairs. However, we can non disregard the scientific grounds that taking Ecstasy can hold profound effects on one’s cognitive and emotional province. Therefore, to claim Ecstasy is a safe drug is non a feasible option – and anyone who uses the drug should utilize it with cautiousness. Mentions Diaries Abraham, H. D. , Aldridge, A. M. A ; Gogia, P. ( 1996 ) .Neuropsychopharmacology 14, 285–298 Allen, R. P. , McCann, U. D. A ; Ricaurte, G. A. ( 1993 )Sleep 16, 560–564 Greer, G. A ; Tolbert, R. J. ( 1986 ) .Psychoactive Drugs 18, 319–327. ChemPort Green, A. R. , Mechan, A. O. , Elliott, J. M. , OShea, E. A ; Colado, M. I. ( 2003 ) .Pharmacol. Rev. 55, 463–508. McCann, U. D. , Ridenour, A. , Shaham, Y. A ; Ricaurte, G. A. ( 1994 ) .Neuropsychopharmacology, 10, 129–138. Morgan, M. J. ( 2000 ) .Psychopharmacology 152, 230–248. Ricaurte, G. A. , Yuan, J. , Hatzidimitriou, G. , Cord, B. J. A ; McCann, U. D. ( 2002 ) .Science 297, 2260–2263. Internet Sabin, K. ( 2002 ) Drugs and Death Retrieved on 31 March 2004 from hypertext transfer protocol: //www.newsreview.com/issues/sacto/2002-05-16/news.asp Whiteaker ( 2004 )‘The New Youth Drug Culture: Friends, Parties and Drug Cocktails ‘A study of university pupils about ‘party drug’ usage. VAADA. The University of Melbourne. Cited on hypertext transfer protocol: //www.vaada.org.au/Party % 20Drugs % 20Report % 20June % 2004.doc. Other Drugs and Crime Prevention Committee ( 2004 and 2003 ) , Inquiry into Amphetamines and Party Drug Use in Victoria, Melbourne.

10 College Majors That Lead to the Highest Salaries

10 College Majors That Lead to the Highest Salaries If you’ve heard any of the dismal stats on student loan debt- like that 44 million Americans owe more than $1.3 trillion in student loan debt- then suddenly that college degree might not seem like the great idea it once did. (As a former English major, I feel that pain.) You shouldn’t let that scare you away from higher ed, though. If you’re a student deciding where to focus, or if you’re thinking about going back to school, the best asset you can have is knowledge of what your game plan is. That means finding a post-school job that will let you pay off your school debt. It also means picking a field of study that will set you up well after you walk off with that hard-earned degree. Salary isn’t the only thing to consider when you’re planning you’re future, but let’s face it- it’s awfully important. While there is some diversity among the highest-paying majors, the main theme is that STEM (Science, Technology, Engineering , and Mathematics) careers are among the hottest out there right now. Let’s look at 10 of the highest-earning majors, based on a survey conducted by Glassdoor, and what you can do with them. Spoiler alert: most of them are in the sciences and technology.1. Computer ScienceMedian salary: $81,430Spotlight job: Web DeveloperWeb developers design and create websites, as well as maintain the day-to-day operations, improvements, performance, and traffic. Developers need to have strong skills in design and computer programming. The median salary for web developers is $64,790 per year, and the U.S. Bureau of Labor Statistics predicts that the field will grow 27% by 2024 (much faster than average).Spotlight job: Software DeveloperSoftware developers handle the creative side of computer programming. They design apps, programs, interfaces, and the underlying systems. Software developers work with user feedback and teams of other computer specialists to create, refine, and improve progra ms. The median salary for software developers is $100,960 per year, and the U.S. Bureau of Labor Statistics predicts 17% growth by 2024.2. Electrical EngineeringMedian salary: $68,438Spotlight job: Electrical EngineerElectrical engineers are responsible for designing, developing, and testing electrical equipment, such as electric motors, radar and navigation systems, communications systems, and power generation equipment.  They work in many different industries, from manufacturing to telecommunications to government agencies. The median salary for electrical engineers is $95,230 per year, and although the U.S. Bureau of Labor Statistics predicting gangbusters growth between now and 2024, the field is expected to stay steady.Spotlight job:  Systems Engineer3. Mechanical EngineeringMedian salary: $68,000Spotlight job: Mechanical EngineerMechanical engineers are true multidisciplinarians- this is one of the most versatile and varied engineering fields. Mechanical engineers design, develop, build, and test mechanical devices, including tools, engines, and machines. The median salary for mechanical engineers is $83,590, and the U.S. Bureau of Labor Statistics predicts 5% growth by 2024.Spotlight job: Industrial DesignerIndustrial designers create designs for manufactured products (including cars, appliances, toys, and consumer products). Industrial designers combine concepts from engineering, business, and art/design perspectives to create user-friendly and attractive products. The median salary for industrial designers is $67,130, and the U.S. Bureau of Labor Statistics predicts modest growth of 2% by 2024.4. Chemical EngineeringMedian salary: $65,000Spotlight job: Chemical EngineerChemical engineers work on the production and use of chemicals, fuel, drugs, food, and many other products, as well as designing processes and equipment for manufacturing, planning and testing production methods, and directing facility operations. They apply chemistry, physics, and engineering principles to their products and processes. Chemical engineers can be found in research facilities, industrial plants, and other laboratory settings. The median salary for chemical engineers is $97,360, and the field is expected to grow about 2% by 2024.5. Industrial EngineeringMedian salary: $64,381Spotlight job: Industrial EngineerIndustrial engineers work to make production and manufacturing processes more efficient. They create systems that coordinate resources (people, machines, materials, information, and energy) to make a product faster, cheaper, and more effectively. The median salary for industrial engineers is $83,470, and the U.S. Bureau of Labor Statistics predicts modest changes of about 1% by 2024.6. Information TechnologyMedian salary: $64,008Spotlight job: Information Security AnalystInformation security analysts are the first line of defense for an organization’s computer network and information. They devise and implement security strategies to gu ard against data theft, cyberattacks, and other digital threats. The median salary for information security analysts is $90,120, and as the number of cyber threats rise, so do job opportunities: the Bureau of Labor Statistics predicts 18% growth by 2024.Spotlight job: Network and Computer Systems AdministratorWith everything going digital these days, network and computer systems administrators have key roles in nearly every organization. They are responsible for the day-to-day maintenance and development of a company’s digital infrastructure. The median salary for network administrators is $77,810, and the field is expected to grow at least 8% by 2024.7. Civil EngineeringMedian salary: $61,500Spotlight job: Civil EngineerIf you’ve traveled on a road, been through an airport, or used a public water system, you’ve enjoyed the handiwork of a civil engineer. These engineers design and supervise construction projects in both the public and private sectors. This can i nclude roads, buildings, airports, tunnels, dams, bridges, and public utilities like water supply and sewage treatment. The median salary for civil engineers is $82,220, and the U.S. Bureau of Labor Statistics expects that there will be 8% more civil engineering jobs by 2024.8. StatisticsMedian salary: $60,000Spotlight job: StatisticianStatisticians collect and analyze data, and use it to help solve real-world problems in business, finance, healthcare, engineering, or other areas. Statisticians are in high demand in both the private and public sectors- for example, insurance companies and government agencies. As we move more and more into a data-driven society, the need for qualified professionals to make sense and strategy out of that data grows by the day. The median salary for statisticians is $80,110 per year, and the field is expected to grow rapidly- 34% by 2024.Spotlight job: Market Research AnalystMarket research analysts are the ones who can tell you if your product is like ly to be a hit or a flop. They analyze complex market factors, and predict sales for a particular good or service. Their research leads to decisions about what products should be, who would buy them, and what price the market will bear. The median salary for market research analysts is $62,150, and the field is expected to grow by 19% by 2024.9. NursingMedian salary: $58,928Spotlight job: Registered NurseThe healthcare field is as strong as ever, and excellent nurses are always in high demand. Nurses coordinate and provide direct patient care, working with patients in many different healthcare settings (hospitals, clinics, schools, facilities, home care, hospices, etc.). The median salary for nurses is $67,490, and demand will grow by 16% (much faster than average) by 2024.Spotlight job: Nurse AnesthetistNurses in this highly specialized area can administer anesthesia before procedures, monitor patients’ vital signs, and oversee patients’ recovery after surgery. They w ork with surgeons, physicians, an anesthetists as part of the surgical care team. The median salary for nurse anesthetists is $160,250, and the field is expected to grow much faster than average, in line with other nursing careers.10. FinanceMedian salary: $54,900Spotlight job: Financial AnalystFinancial analysts are often the voice of financial reason, providing expertise on markets and business to help clients and companies make investment decisions. They monitor the financial markets very closely, particularly the performance of stocks, bonds, funds, and other investment types. The median salary for financial analysts is $80,310, and by 2024 the Bureau of Labor Statistics expects there will be 12% more jobs for financial analysts.Spotlight job: AccountantAccountants are responsible for preparing and analyzing financial records, including taxes and daily financial operations. They oversee day-to-day financial operations to ensure that a company is running efficiently and on budget . The median salary for accountants is $67,190, and the field should grow by at least 11% by 2024.If you’re already in college, or just thinking about it, these majors could be a great option for you if you’re seeking a stable, well-paying career path.

Outsourcing Business Research Paper Example | Topics and Well Written Essays - 2000 words - 1

Outsourcing Business - Research Paper Example Ang and Inkpen (2008) argue that since 2002 offshoring activities have increased significantly, not restricted to only IT sector, but it has gone beyond that in the field of business process outsourcing (BPO), legal outsourcing (LO), infrastructure outsourcing (IO), knowledge process outsourcing (KPO), and many more. In 2000, total offshoring business was estimated at the US $119 billion; however, by 2008, that increased significantly to the tune of US$ 300 billion. In 2011, the US companies outsourced 2,273,392 jobs and as much as 35 percent of the companies consented that they had been outsourcing at least one of the processes. While segregating outsourcing in the services, it has been found that 43 percent of the companies in the IT sector in the US resorted to outsourcing; while in R&D and distribution services, sector outsourcing percentages are found to be 38 percent and 26 percent respectively (Statistic Brain, 2012). Lewin (2012) argues that emerging economies occupy a large pie of global offshoring business promoting overall economic development as the US companies do not mind offshoring nine or more time zones away despite the presence of near-shore delivery centers. This clearly implies that offshoring has been accepted across mid and large sized US companies for varied reasons and it is going to stay and grow in the future bringing new waves of economic development across the globe. From the above exhibit, it is quite clear that cost reduction and unavailability of IT skills were the main reasons for the companies to outsource. Freeing up internal resources and improving customer focus were two other major reasons for the outsourcing given by the companies. Global offshoring IT and BPO market is huge but its evolution has been dependent upon the three factors: Supply quality; timely delivery; and adopting the actions.

Oil Spills And Their Affects On Our Beaches Research Paper

Oil Spills And Their Affects On Our Beaches - Research Paper Example Oil Pollution Act of 1990 (OPA ’90), which imposed unlimited liability on proprietors and operators of ships and shore facilities who discharge oil  into surrounding waters. This Act met with much criticism, especially from energy company lobbyists, for it contained strict rules and regulations that had the potential to alter international oil trade. For example, the cost of compliance with OPA ’90 was said to be â€Å"$1.3 billion over the next 24 years, but some say the figure will be closer to $7 million by 2015.† (Oshins, 1992, p.54) This is an important statistic in the context of this essay, for it indicates the real reason behind continued instances of oil spills – namely, cost of compliance. Although the OPA ’90 was supposed to deter sub-standard safety measures, it has not fulfilled that end. This is in part due to the perceived excesses in some of its clauses. There is validity to those claims which portray OPA ’90 in negative lig ht, attacking it for the severity of punitive measures it encompasses. For example, under the OPA ’90, â€Å"in addition to removal costs, the responsible party becomes liable for consequential damages: harm to natural resources, economic loss to real or personal property, losses suffered by one who earns subsistence from natural resources, losses in tax revenues, loss to profit or earning capacity, and increased expense of public services.† (Oshins, 1992, p.54) Hence, a major drawback of the legislation is its underlying assumption that exorbitant financial compensation after the event will somewhat prompt oil companies to tighten up their transportation procedures. But this assumption has proven weak. For example, although there are some efforts by major oil companies toward making their oceanic oil transport as risk-free as possible, the frequency of spills has not reduced. The recent British Petroleum disaster is another example of the systemic failure of oil indus try and government agencies. The recent BP disaster is as much a result of human failures as it is due to technical shortcomings and inadequate planning. Even as investigations were started and all pretense of earnestness were shown by politicians, the most important reason has been ignored – namely, that deep sea drilling is inherently risky and continued use of fossil fuels are already affecting marine ecosystems through climate change. Another factor that amplifies risk of oil-spill is the generation of hydrate gas. Under a depth of 1000 feet or more beneath the sea-level hydrate gases such as methane are found in a solid state, compressed into â€Å"molecular cages of ice†. (Allen, 2010, p.12) But if they happen to get destabilized due to a reduction in pressure or rise in temperature, the â€Å"gas-water compound can quickly expand 164 times in volume. If ignited, even ice-bound hydrates burn. This could potentially block the [blowout preventer] stack, kill lines and chokes, obstruct the movement of the drill string, and cause serious operational and safety concerns including blowouts† (Allen, 2010, p.12) In the last thirty years, 165 blowouts were witnessed in U.S. marine zones and 500 worldwide. The Minerals Management Service (MMS), which is the chief government agency looking into the problem, has not taken adequate steps to mitigate this risk. Even in the BP case, the MMS was suspected of colluding with the business corporation: â€Å"